Shift Register (74HC595)
Has three inputs and eight outputs: allows the Arduino to control many outputs at once without as many pins as it would otherwise need.
Input (69)
-
-
Diode (1N4007)
Allows electricity to flow through it in only one direction. Often used with DC motors to prevent reverse currents from damaging components.
-
Infrared Remote
Sends infrared light pulses that can be read by an Infrared Receiver.
-
Stepper Motor Driver
Receives motion instructions from the Arduino, and provides power to the Stepper Motor.
-
Stepper Motor
Electrical connector to power motor and receive movement instructions from Arduino. Output shaft can rotate with motor continuously in either direction.
-
Breadboard Power Supply
Supplies power to a breadboard, available to be used by electronic components plugged into it.
-
Uno Compatible Breadboard Shield
Provides a convenient, compact area for a breadboard circuit directly plugged in to the top of the Arduino Uno.
-
LCD Character Display Module
Displays rows of text
-
Arcade Push-button
A large, clicky button.
-
Transistor (PN2222)
An electrical switch that allows you to turn on and off high voltages and currents, using a small amount of electricity.
-
Small Breadboard
-
Medium Breadboard
-
Large Breadboard
-
Male-male jumper wire
-
Female-male jumper wire
-
Female-female jumper wire
-
Servo Motor
Motor that rotates to an absolute position
-
Arduino Uno
The Arduino gets instructions from a computer and follows them as long as it has power. It can be an input, output, or both.
-
Light Emitting Diode (LED)
Illuminates when power flows through. It is a diode, so only allows power to flow in one direction.
-
9V Battery
A 9V DC battery
-
Ultrasonic Ranger
Measures distance
-
5V Relay
Switches and isolates electrical devices
-
Passive Buzzer
Makes variable-pitch beeping, driven by the frequency of a changing (alternating current) power source connected to it.
-
Active Buzzer
Makes a high-pitched beeping sound when powered with a steady (direct current) power source.
-
Pancake Vibration Motor
Vibrates quickly when powered. Usually used as a simple tactile signal. Operates at 5V.
-
Potentiometer
A rotating variable resistor (knob)
-
Joystick Module
Senses up/down and left/right movement of a thumb-sized joystick. Also can be clicked like a button.
-
3-Axis Accelerometer
Senses acceleration in X, Y, and Z axes; used to detect motion and orientation.
-
Tactile Button Switch
Makes an electrical connection when pressed.
-
Lever Microswitch
A springy snap-action button with a lever arm.
-
Tilt Switch
A small metal ball rolls inside the can, and the electrical switch opens or closes based on its position. Detects coarse orientation.
-
Thermistor
Changes its electrical resistance based on its temperature: used as a thermometer.
-
Temperature and Humidity Sensor
Measures ambient temperature and humidity
-
Photoresistor
Measures luminosity (light)
-
Infrared Reciever
Interprets infrared remote control signals.
-
Optical Proximity Sensor
Measures distance
-
10MΩ resistor
-
1MΩ resistor
-
470kΩ resistor
-
100kΩ resistor
-
47kΩ resistor
-
33kΩ resistor
-
22kΩ resistor
-
15kΩ resistor
-
10kΩ resistor
-
5.6kΩ resistor
-
5.1kΩ resistor
-
4.7kΩ resistor
-
3.3kΩ resistor
-
2.7kΩ resistor
-
2.2kΩ resistor
-
2kΩ resistor
-
1.5kΩ resistor
-
1kΩ resistor
-
680Ω resistor
-
470Ω resistor
-
330Ω resistor
-
270Ω resistor
-
220Ω resistor
-
150Ω resistor
-
100Ω resistor
-
47Ω resistor
-
33Ω resistor
-
10Ω resistor
-
80mΩ resistor
-
70mΩ resistor
-
50mΩ resistor
-
DC Motor
The motor spins when power flows through its wires. Output shaft can rotate continuously in either direction.
-
H-Bridge Motor Driver
Receives motion instructions from the Arduino, and provides power to two motors.